Question 1

What size Lewmar anchor do I need for my boat?

Accepted Answer

The Lewmar Vector Manual is rated for boats up to 22 ft and 3,000 lbs. The Axis Electric (6' and 8' pole variants) handles boats up to 26 ft and 4,500 lbs. The Axis Pro handles boats up to 28 ft and 4,500 lbs and deploys to a 10-foot depth. Match the pole length to your transom height — the 6' variant suits aluminum skiffs and low-profile hulls; the 8' works for standard-height bay boats, center-consoles, and flats boats.

Question 2

How do I install a Lewmar shallow water anchor?

Accepted Answer

Installation requires two through-bolts into the transom and a single 12V wiring connection for the Axis electric models. Most installations are complete in under two hours without professional help. The kit includes transom mount hardware and a 12-gauge wiring harness for the cockpit switch. Vector Manual anchors use the same two-bolt transom pattern and require no electrical connection.

Question 3

What are the power requirements for the Axis electric anchor?

Accepted Answer

The Axis motor runs on 12V DC and draws 15–20 amps during the 2.5–3-second deployment cycle. Standby current while anchored is under 0.1 amps. On a high-use day averaging 30 deployment cycles, total consumption is roughly 0.4–0.6 amp-hours — negligible against a standard 100+ Ah house battery. No dedicated circuit or relay is required for a standard installation.

Question 4

What mounting bracket options are available?

Accepted Answer

Lewmar offers four optional mounting brackets (sold separately), all using the same two-bolt transom pattern: the Quick Release Bracket, the Jack Plate Mounting Bracket, the Motor Mounting Bracket, and the Pontoon Deck Mounting Bracket. Switching between brackets does not require transom re-drilling.

Question 5

Can I use a Lewmar anchor in saltwater?

Accepted Answer

Yes. Both the Axis and Vector are engineered for saltwater use. The Axis brushless motor is sealed against saltwater ingress, the pole is marine-grade composite, and all hardware is corrosion-resistant stainless steel and anodized aluminum. Lewmar recommends a freshwater rinse of the pole, motor housing, and switch connectors after every saltwater outing.

Question 6

What is the difference between the Axis Electric and the Vector Manual?

Accepted Answer

The Axis is an electric 12V stake anchor with a push-button cockpit switch — deployment and retrieval take about 8 seconds. It handles boats up to 26 ft and 4,500 lbs. The Vector is a manual anchor operated by hand, rated for boats up to 22 ft and 3,000 lbs. Both share the same 8-foot deployment depth and 54-inch retracted height.

Frequently Asked Questions

Shallow Water Anchor FAQ

Still Have a Question?